OMS KEA 300 TGI, Use And Maintenance Manual

Page: 28 / 36

28
1. Remove the product holder tray
(see paragraph 6.2.1)
2. remove the blade guard (Fig. 16)
3. remove the sharpening device (a)
and, using the graduated dial, set
the ribbed thickness gauge tray
(g) to “0”;
4. rest the extractor (b) on the
blade, so that the discharge (h)
coincides with the position of the
ring (c);
5. tighten the two dials (e) without
overtightening them;
6. unscrew the screws (f) securing
the blade, using protective
gloves and remove the blade
securely by gripping the two
knobs;
7. after cleaning, replace the blade
by performing the steps in reverse
over
Figure 18 - Positioning the blade
extraction jig
6.2.3 CLEANING THE SHARPENER
The sharpener body must be cleaned using a cloth, while the wheels
must be cleaned using a dry toothbrush.
6.2.4 CLEANING THE SLICE DEFLECTOR
To remove the slice deflector, simply
unscrew the two screws (a) that keep
it locked in place. Now clean the slice
deflector with water and mild
detergent.
Figure 19 - View of the slice
deflector