2. Setup: Setting the Temperature Measurement
32
ZR-RX40 Start Up Guide
2. Setup: Setting the Temperature Measurement
Make the settings required for data capture. Here we will make only those settings that are absolutely
necessary. The other settings will be left as the default settings (the settings made prior to shipment from the
factory)
Basic Setup Menu Operation
1
Press the MENU key to display the setup menu
screen.
2
Select [TEMP.] for the Input parameter for CH 1 and CH 2.
(a) Move the cursor to the [Input] parameter opposite
CH 1 and select [TEMP.]
(b) Make the same setting for CH 2.
The keys used on the menu screens are the
keys, the ENTER key, and the QUIT key. The current cursor
position is displayed in blue. Use the
keys to move the cursor. If you press the ENTER key at the cursor
position, a selection menu or a box for inputting numeric values and so forth is displayed. If you press the QUIT key,
the screen closes and the ettings are canceled.
Examples of selection menu operations (AMP screen)
Note: For voltage measurement, select "DC".
Note
1.Use the keys to move the cursor to the
Inputparameter opposite CH 1 and then press the
ENTER key.
2.A selection menu is displayed when the ENTER
key is pressed. Use the and keys to select
"TEMP."
3. Press the ENTER key to confirm your selection.
%*)4172
52#064#%'
215+6+10
6+/'&+8
37+6
-';.1%-
75$&4+8'
#./%.4
(+.'
0#8+
%74514 &+52.#;
4'8+'9
56#46
5612
'06'4
06
06'
1
2