Omron ZR-RX40, Startup Manual, Page: 17 / 46

Connection Procedures
16
ZR-RX40 Start Up Guide
Making Connections to the Analog Input Terminals
Making Connections to the External Input/Output
Terminals (Using ZR-XRL1)
Attaching USB Memory Device
You're able to store measured data directly to the USB memory device.
Attach the USB memory to the USB memory terminal.
Logic alarm cable (sold separately: ZR-XRL1) is required.
<Specifications of supported USB memory device>
• Power source : +5 V
• Power consumption : 250 mA or below
• Capacity : No limit (except each file must be within 2 GB)
USB memory device with security functions such as fingerprint authentication cannot be used.
CH1 CH20
+
-
b
+
+
-
+
-
+
-
-
b
Direct volt a ge
Direct volt a ge inp u t Thermoco u ple inp u t
Direct c u rrent inp u t
Re s i s t a nce temper a t u re detector inp u t
A
B
b
Compen sa tion copper wire
Direct c u rrent
Orange with red dotted line 㧦ޓ 1
Orange with black dotted line 㧦ޓ 2
Grey with red dotted line 㧦ޓ 3
Grey with black dotted line 㧦ޓ 4
White with red dotted line 㧦ޓ 1
White with black dotted line 㧦ޓ 2
Yellow with red dotted line 㧦ޓ 3
Yellow with black dotted line 㧦ޓ 4
Pink with red dotted line 㧦ޓ Trigger input
Pink with black dotted line
Shielded
GND
Logic/pulse input
Alarm output
<Connection diagram>
Logic alarm cable
(ZR-XRL1)
Note
Note
USB memory device