2.4.
ID tag communication functions
FL remote ID sets the operating mode with the mode switch, selects the command, adds the option that
operates the command, and communicates with the ID tag.
2.4.1.
Operational mode
In the operating mode, there are three modes.
2.4.1.1.
Trigger mode
The ID tag installed in work or the palette is detected in the communication area of the antenna by the
sensor or the switch, and the control signal (trigger signal) is output from the plc to FL REMOTE ID. This
FL REMOTE ID begins the communication with the ID tag, and outputs the result to the plc by the signal.
2.4.1.2.
Auto mode
When the ID tag installed in work or the palette enters in the communication area of the antenna, FL
REMOTE ID begins the ID tag and the communication, and outputs the result to the plc.
Summary of Contents for V680-D1KP66T-SP
Page 17: ......
