Omron SYSMAC C-series, System Manual

Page: 102 / 131

93
CONTINUE and STOP Mode Operation
Section 7-4
The following configuration and table will be used to show LED indications
when power to Slave #0 is interrupted in STOP mode Refer to Section 2 for
indicator details.
C500 Master
C500 Slave
Slave #0 C500 Slaves
Slave #1 Terminator
C500 CPU Rack
Condition C500 LEDs LEDs on Master LEDs on
Slave #0 LEDs on
Slave #1
POWER RUN ERROR ALARM OUT IN TR/
ERR TEST
OK END RS
CHECK LINE
ERR TR/
ERR ERR TR/
ERR ERR
Normal
operation lit lit not lit not lit not lit flash not lit not lit not lit flash not lit flash not lit
Power in-
terruption
to Slave
#0 lit lit not lit lit not lit lit not lit not lit not lit not
lit
not lit lit not lit
Remote I/O error occurs; operation continues.
Word 59 contains “#B008.” Transmission error occurs;
transmission to both Slaves
stopped. Power inter-
rupted. Transmis-
sion error
Power re-
stored to
Slave #0 lit lit not lit lit not lit lit not lit not lit not lit lit not lit lit not lit
Remote I/O error. Transmission error; no trans-
mission to Slaves Not
functioning. Transmis-
sion error;
not func-
tioning
Operations in STOP Mode