Multi-function input 1 (Forward/Stop)
Multi-function input 2 (Reverse/ Stop)
Multi-function input 3 (External fault: Normally open)
Multi-function input 4 (Fault reset)
Multi-function input 5 (Multi-step speed reference 1)
Multi-function input 6 (Multi-step speed reference 2)
Multi-function input 7 (Inching frequency command)
Sequence input common
Frequency reference power supply output
Frequency reference input
Frequency reference common
Pulse train input
Multi-function contact output (Normally open: Fault)
Multi-function contact output (Normally closed: Fault)
Multi-function contact output common
Multi-function photocoupler output 1 (During Operation)
Multi-function photocoupler output 2 (At Speed)
Multi-function photocoupler output common
Multi-function analog output (Output Freq.)
Multi-function analog output common
Photocoupler 8mA at 24 V
DC (See note 2,3)
20mA at 12 V DC
0 to 10 V DC (20W)
Response frequency:
0 to 33 kHz (30% to 70% ED)
H: 3.5 to 13.2 V
L: 0.8 V max.
Relay output
1A max. at 30 V DC
1A max. at 250 V DC
Open collector output
50mA max. at 48 V DC
2mA max. at 0 to 10 V DC
S1
S2
S3
S4
S5
S6
S7
SC
FS
FR
FC
RP
MA
MB
MC
P1
P2
PC
AM
AC
Input
Output
Control Circuit Terminals
Symbol
Name
Specification
Note 1:
Functions in parentheses are default settings
Note 2:
To provide an external power supply and wire the terminals through a common positive line, set SW1 to
PNP and use a 24 V DC + 10% power supply
Note 3:
NPN is the default setting for these terminals. However by using SW1, NPN or PNP input can be
selected as shown below.
360
24V
SW1
GND
GND
SC
S1 to 7
3.3k
0.1
µ
(Default setting)
GND
SC
360
SW1
24V
S1 to 7
24 V DC
3.3k
GND
(±10%)
0.1
µ
NPN
PNP
