Omron STC-MBE132U3V, Product Specifications And User'S Manual

Page: 50 / 53

No.13S062-07
50/53
STC-MBE132U3V / MCE132U3V / STC-MCE132U3V-C
Product Specifications and User’s Guide
9.16.6 EventControl
Name Description
EventSelector Selects which Event to signal to the host application.
EventNotification Activate or deactivate the notification to the host application of the occurrence of the
selected Event.
9.16.7 EventExposureEndData
Name Description
EventExposureEnd Returns the unique identifier of the ExposureEnd type of Event. This feature can be used
to register a callback function to be notified of the event occurrence. Its value uniquely
identifies the type of event that will be received.
EventExposureEndTimestamp Returns the Timestamp of the ExposureEnd Event. It can be used to determine precisely
when the event occured.
9.16.8 EventTestData
Name Description
EventTest Returns the unique identifier of the Test type of Event. This feature can be used to
register a callback function to be notified of the event occurrence. Its value uniquely
identifies the type of event that will be received.
EventTestTimestamp Returns the timestamp of the Test event.
9.16.9 AnalogControl
Name Description
GainSelector Selects which Gain is controlled by the various Gain features.
Gain Controls the selected gain as an absolute physical value. This is an amplification factor
applied to the video signal.
GainAuto Sets the automatic gain control (AGC) mode. The exact algorithm used to implement
AGC is device-specific.
GainAutoLimitMax Determine the upper limit of gain when GainAuto is set to Continuous.
GainAutoLimitMin Determine the lower limit of gain when GainAuto is set to Continuous.
AutoLightTarget Determine the brightness target for GainAuto.
BlackLevelSelector Selects which Black Level is controlled by the various Black Level features.
BlackLevel Controls the black level as an absolute physical value. This represents a DC offset
applied to the video signal.
BalanceRatioSelector Selects which Balance ratio to control.
BalanceRatio Controls ratio of the selected color component to a reference color component. It is used
for white balancing.
BalanceWhiteAuto Controls the mode for automatic white balancing between the color channels. The white
balancing ratios are automatically adjusted.
9.16.10 LUTControl
Name Description
PixelCorrectionAllEnabled Enable pixel correction for all pixels.
PixelCorrectionIndex Determine index of targeted pixel for pixel correction.
PixelCorrectionEnabled Determine if targeted pixel is enabled for pixel correction.
PixelCorrectionX Determine x-coordinate of targeted pixel for pixel correction.
PixelCorrectionY Determine y-coordinate of targeted pixel for pixel correction.