![background image](http://html1.mh-extra.com/html/omron/stc-mbe132u3v/stc-mbe132u3v_product-specifications-and-users-manual_742901027.webp)
No.13S062-07
27/53
STC-MBE132U3V / MCE132U3V / STC-MCE132U3V-C
Product Specifications and User’s Guide
8.1.3 Trigger Delay
As mentioned in the previous chapter, “Image acquisition and Camera Mode”, each trigger can add to the
duration of the input signal
This Trigger Delay can add to the duration per
μsecond
.
GenICam Parameters
TriggerDelay
Integer Type
Trigger Delay
Range: 0 to 262,143 μseconds, Default: 0 μsecond
8.2
Output Port Function
This function sets the Output to Line Mode, and then the Line is assigned as the output.
The following functions can be assigned when the IO port is used as the output signal port.
8.2.1 Line Source
The following list shows the configurable functions available through the Line Source.
The function that describes as “Enable” on “Changeable Polarity” is the configurable polarity on the Line Inverter
(true, false).
No.
Function Name
Changeable
Polarity
1)
Off (Default)
-
2)
User Output
-
3)
Trigger Out
Enable
4)
Trigger Out (Through)
Enable
5)
Exposure End Out
Enable
6)
Frame End Out
Enable
7)
Transfer End Out
Enable
8)
Strobe Out
Enable
9)
Exposure Active
Enable
1) Off (Disable)
Disable the output signal.
2) User Output (General Output)
High or Low level signal that sets on the software is output.
3) Trigger Out
The trigger signal that added “Trigger Out Delay (Output pulse delay time)” and “Trigger Out On Time
(Output pulse width)” is output.
4) Trigger Out (Through)
The trigger input signal is output. (with a slight internal delay)
5) Exposure End Out
“Trigger Out on Time (Output pulse width)” activation time signal with set “Trigger Out Delay (Output
pulse delay time)” is output when the expose was finished.
6) Frame End Out (Sensor Readout End)
“Trigger Out on Time (Output pulse width)” activation time signal with set “Trigger Out Delay (Output
pulse delay time)” is output when the sensor read out was finished.
7) Transfer End Out
“Trigger Out on Time (Output pulse width)” activation time signal with set “Trigger Out Delay (Output
pulse delay time)” is output when one frame image transferring from camera was finished.