![background image](http://html1.mh-extra.com/html/omron/stc-lbs132poe-swir/stc-lbs132poe-swir_product-specifications-and-users-manual_742897016.webp)
No.21S102-02
16/71
STC-LBS132POE-SWIR
Product Specifications and User’s Guide
7.2
Power/IO Connector
HR10A-7R-6PB (Hirose) or equivalent
This connector is for the power supply and input / output signals.
The power from this connector is priority power for camera when power supplies through this connector and
PoE at same time.
Please use HR10A-7P-6S (Hirose) or equivalent for cable.
Pin assignment
Configuration of Line2 (Pin No.3) and Line1 (Pin No.4)
Output signal can be assign by GenICam command.
.
Pin No.
Signal Name
IN / OUT
Voltage
1
POWER IN
IN
+10.8 to +26.4 Vdc
2
Opto-isolated in
(Line0)
IN
Low: Smaller than +1.0 V
High: +3.0 to +26.4 V
* Potential difference between
TRG_in and Opt. Isolated Common
3
Open Collector
GPIO
(Line2)
IN / OUT
+3.0 to +26.4 V / Open Collector
4
Opto-isolated out
(Line1)
OUT
Open Collector
5
Opto-isolated
Common
IN
6
GND
IN
0 V
GenICam
1) Frame Trigger Wait (Default for all output)
2) Frame Trigger Internal
3) Exposure Active
4) Acquisition Trigger Wait
5) Acquisition Trigger Internal
6) Sensor Read Out
7) Line 0
8) Line 2
9) User Output 1
10) User Output 2
11) Timer 0 Active
12) Software Signal 0
13) Software Signal 1
14) Logic Block 0
15) Pulse Per Second