No.21S102-02
11/71
STC-LBS132POE-SWIR
Product Specifications and User’s Guide
6 Specifications
6.1
Electronic Specifications
Product
STC-LBS132POE-SWIR
Image Sensor
1/2” 1.3M Progressive SWIR CMOS
(SONY: IMX990)
Shutter Type
Global Shutter
Active Picture Elements
1,280 (H) x 1,024 (V)
Cell Size
5.0 (H) x 5.0 (V) µm
Scanning Mode
Full scanning (Full resolution)
/ ROI
Frame rate (at full scanning)
8bits: 84 fps
/ 10bits: 42 fps / 10bits Packed: 56 fps / 12bits: 42 fps / 12bits Packed: 56 fps
Maximum frame rate: 2,039 fps @ 8 lines (8bits)
ADC bit depth
10bits / 12bits
Image Output Format
Mono8
/ Mono10 / Mono10Packed / Mono12 / Mono12Packed
Noise
Level
8bits output
Less than 1 digit (Gain 0 dB)
10bits / 10bits Packed output
Less than 4 digits (Gain 0 dB)
12bits / 12bits Packed output
Less than 16 digits (Gain 0 dB)
Spectral Sensitivity Range
400 to 1,700 nm
Exposure Time
8 µseconds to 16.777 seconds
(Default: 11,749 µseconds)
Gain
Analog Gain
0 to 14.8 dB
(Default: 0 dB)
Digital Gain
x1 to x3
(Default: x1)
ROI
Horizontal: 8 to 1,280 pixels, Vertical: 8 to 1,024 lines
(Default: 1,280 x 1,024)
Adjustable steps for size: 8 pixels in horizontal direction and 8 lines in vertical direction
Adjustable steps for offset: 8 pixels in horizontal direction and 8 lines in vertical direction
Gamma
Gamma 0.1 to 4.0
(Default: 1.0)
Binning
Horizontal and Vertical decimation (2x2) /
Off
Decimation
Horizontal and Vertical decimation (2x2) /
Off
Image Flip
Horizontal / Vertical / Horizontal and Vertical /
Off
Defective Pixel Correction
Up to 8,192 points (
Default: On
)
Auto
Image
Control
Auto Exposure
Support
(Default: OFF)
Auto Gain
Support
(Default: OFF)
Auto White Balance
N/A
Operational Mode
Edge preset trigger / Pulse width trigger /
Free run
Interface
PoE: IEEE802.3af CLASS3 (1000BASE-T)
Protocol
GigE Vision 2.1 and GenICam SFNC 2.6, IEEE1588 (PTP)
I/O
One opto-isolated input, one opto-isolated output and one open collector GPIO (Input or output)
Power
Input Voltage (*1) (*2)
+10.8 to +26.4 Vdc External power (via Power/IO connector) /
Power Over Ethernet (IEEE802.3af)
Consumption (*3)
+12 V / +24 V: 10.1 W, PoE: 10.2 W
Default:
Bold
