A-10
Standard Photoelectric Sensors
Specifications
Note: 1 . The contact resistance of the connector.
2 . The dielectric strength of the connector.
Materials and Finish
Note: The T-joint of the XS2R is aluminum/white.
Socket Appearance
Note: The AC and DC connectors are different as shown here and therefore
cannot be connected together.
Rated current
3 A
Rated voltage
125 VDC, 250 VAC
Contact resistance
40 m
Ω
max. (20 mV max., 100 mA max.)
(See note 1).
Insulation resistance
1,000 M
Ω
min. (at 500 VDC)
Dielectric strength
1,500 VAC for 1 min (leakage current:
1 mA max.) (See note 2).
Degree of protection
IP67 (IEC529)
Insertion tolerance
200 times min.
Assembled fixture
strength
Tensile: 98 N/15 s
Torsion: 0.98 N·m/15 s
Ambient temperature
Operating: -25
°
C to 70
°
C
Item
XS2F
XS2R
XS2C/XS2G
Con-
tacts
Materials
Phosphor
bronze
Brass
Finish
Nickel base, 0.4-
μ
m gold plating
Fixtures
Materials
Brass (See note 1.)
Finish
Nickel plated (See note 1.)
Pin
Block
Materials
PBT resin
(UL94V-0)
PA resin
(UL94V-0)
PBT resin
(UL94V-0)
Finish
For DC: light gray; for AC: dark gray
O-ring/rubber bush-
ing
Rubber
Cover
Polyester
elastomer
---
PBT resin
(UL94V-0)
Cap
---
---
PBT resin
(UL94V-0)
Cable clamp
---
---
PA resin
(UL94V-0)
Pin clamp
---
---
PBT resin
(UL94V-0)
Lock spring
---
---
LCP resin
(UL94V-0)
Watertight bushing
---
---
Rubber
Ring
---
---
Steel
DC type
AC type
Male contacts
Female
contacts
Male contacts
Female
contacts
