A-20
Standard Photoelectric Sensors
M12 Connector Terminal Boxes
XW3B
Materials and Finish
Note: The positive power supply, negative power supply, and ground lines are
AWG18. Signal lines are AWG22.
Ratings and Characteristics
Note: 1 . The contact resistance of the Connector.
2 . The dielectric strength of the Connector.
Compatible Connectors
*1
Note: 1 . Please refer to seperate datasheet X073-E1-01 for these models.
Item
Part name Materials and finish
Connectors
Anchor
Brass/nickel plated
Contacts
Brass/nickel base, 0.4-
μ
m gold plat-
ing
Cable
Cable
Sheath color: gray
Core size: AWG18/AWG22
(See note.)
Case
Case
PBT resin (UL94V-0)/light gray
Bushing
Rubber
PCB
Glass-epoxy board
Seal resin
Urethane resin
Rated current
4 A/port (signal lines)
12 A/box (power lines)
Rated voltage
10 to 30 VDC
Contact resistance
40 M
Ω
max. (with 100 mA max.,
20 mV max.) (See note 1.)
Insulation resistance
100 M
Ω
min. (at 500 VDC)
Dielectric strength
500 VAC for 1 min (leakage current:
1 mA max.) (See note 2.)
Degree of protection
IP67 (IEC529)
Cable retention force
98 N/15 s
Insertion tolerance
200 times
Operating
temperature
-25 to 70
°
C
XS2G
Connector Plug Assemblies
(crimping, soldering, or screw-on)
XS2W
Connectors on cable ends (Sockets or Plugs)
XS2H
Connectors on one cable end (Plugs)
