background image

S8PS

S8PS

12

Parallel Operation

Only 300- and 600-W models can be in parallel operation provided
that they are operated under 90% of the ratings. Do not operate any
other models in parallel.

Make sure that the thickness and the length of all wires connected to
the load are the same to ensure that the wires will have no voltage
drop differences.

INPUT

+ V

– V

+ V

– V

INPUT

Load

Fan Replacement

The service life of the fan is approximately 50,000 hours (at 25

°

C).

The service life varies, however, depending on the ambient temper-
ature or other surrounding environmental conditions such as dust.
As a preventive maintenance measure, replace the fan within two
years if it is used at an ambient temperature of 40

°

C.

Fans are available as replacements.

Model: S82Y-JFAN

Fan Set:
Fan (above), four M4 x 35 sems screws, instruction sheet, and
packing case

Replace the fan as shown in the following illustration.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. T021-E1-2A

OMRON Corporation

Industrial Automation Company

Measuring and Supervisory Controls Department
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: (81)75-344-7108/Fax: (81)75-344-7189

In the interest of product improvement, specifications are subject to change without notice.

Printed in Japan
0501-0.3M (1198)

Summary of Contents for S8PS Series













Reviews: