Omron R88L-EA-AF, Installation Manual

Page: 39 / 84

1 - 35
1 ENGLISH
Accurax Linear Axis Installation Manual
1-
7 Maint
enan
ce
1
After unfastening the cable ties at one or both ends of the cable chain, after replacing cables, or any other modifi-
cation to the cable chain or the cables inside, make sure to fasten the cables correctly to the cable anchorages.
Push and pull the carriage back and forth until it is at the center of the full linear motor axis stroke.
The top section of the cable chain will be approx. half way above the lower section of the chain.
Fasten the upper part of the cable using cables ties. OMRON recommends to use two cable ties for each cable at
each end of the cable chain.
1-7-3 Cables
In order to achieve the best lifetime of the cable, please follow the following procedure.
0,5 0,5