7
. Using the UPS monitoring software and contact signal
48
7-2 When performing auto-save functions using
the UPS service in Windows Server 2003/
XP/2000 + UPS service driver
When using the included "UPS service driver", the OS standard UPS service in Windows Server 2003/
XP/2000 can be used. When there is a power failure the computer can be shut down.
1. Connect the UPS to a computer.
* Only 1 computer can be connected to the UPS
Cable: Included connection cable (RS-232C)
<RS-232C>
Included connection cable (RS-232C)
コネクタ
Connect to
RS-232C
port
Connector
Connect to
RS-232C
port
Connector
2. Install the included "UPS service driver" on the computer.
Software to install: UPS service driver
How to install: Refer to the separate "UPS monitoring software installation guide".