![background image](http://html1.mh-extra.com/html/omron/omnuc-h-series/omnuc-h-series_technical-manual_744166020.webp)
2-3
2-1-2 Wiring Check without I/O Monitor
·
If no I/O monitor is available, use a multimeter and check the voltage as shown in the following dia-
gram.
·
There will be a voltage between the terminals if the output transistor is ON. The reading of the multime-
ter will be 0 V if the output transistor is OFF.
Output
Power supply
Input
Multimeter
Voltage is ON : Output transistor ON
0 V
: Output transistor OFF
Connection to Position Control Unit
Chapter 2
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]