Omron NX1P, Programming Manual

Page: 2 / 106

2
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or
otherwise, without the prior written permission of OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover,
because OMRON is constantly striving to improve its high-quality products, the information
contained in this guide is subject to change without notice. Every precaution has been taken in the
preparation of this guide. Nevertheless, OMRON assumes no responsibility for errors or omissions.
Neither is any liability assumed for damages resulting from the use of the information contained in
this publication.
© OMRON, 2017
Trademarks
•
Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan and
other countries for OMRON factory automation products.
•
Windows is either a registered trademark or trademark of Microsoft Corporation in the United States
and/or other countries.
•
EtherCAT
®
is a registered trademark and patented technology, licensed by Beckhoff Automation
GmbH, Germany
•
EtherNet/IP™ is a trademark of ODVA.
•
Celeron, Intel, and Intel Core are the trademarks of Intel Corporation in the USA and other countries.
•
Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
Other company names and product names in this document are the trademarks or registered
trademarks of their respective companies.