13.3. A new target device should be displayed in the Toolbox with the IP address of the reader that was just
entered.
13.4. Repeat steps 13.1 through 13.3 for the remaining ID-40 readers. Their IP addresses are listed below.
•
192.168.250.12
•
192.168.250.13
•
192.168.250.14
•
192.168.250.15
•
192.168.250.16
13.5. The Toolbox should now list all six ID-40 readers as shown below.
13.6. In the main window of SYSMAC Studio, click the "Tag Set" button, circled in the image below, and click
"Registration All" to register the ID-40 EtherNet/IP global variables.
21