42
Response time
Output configuration
Relay output
Transistor
output
BCD and
transistor output
Linear and
transistor output
Communication
and transistor
output
Comparative output
10 ms max.
1 ms max.
20 ms max.
20 ms max.
1 ms max.
BCD output
---
---
Refer to page 115.
---
---
Linear output
---
---
---
20 ms max.
---
Maximum pulse counting speed is the maximum speed at which the K3NR
can count INA input pulses accurately. If comparative output is used as con-
trol output, the maximum pulse counting speed can be obtained as follows:
Maximum counting speed (cps) = 1/Delay in comparative outputs (sec)
If comparative output is directly connected to RESET input, the maximum
pulse counting speed can be obtained as follows:
Maximum counting speed (cps) = 1/Delay in comparative outputs (sec) + Re-
sponse time of RESET input (sec)
The response time of the HOLD or RESET input is the time required for the
K3TR to accept HOLD or RESET input after the HOLD or RESET input turns
ON. This is illustrated in the following diagram.
INA
Comparative output
Delay in comparative outputs
HOLD or
RESET input
Acceptance of HOLD or RESET input
Response time of HOLD or RESET input
(20 ms max.)
Maximum Pulse Counting
Speed
Response Time of HOLD or
RESET Input
Pulse Counting:
f7
Section 3-7
