Omron K3GN, Instructions Manual, Page: 5 / 14

1/32 DIN Digital Panel Meter
K3GN
F-9
D
igi
ta
l pa
n
e
l
in
di
c
a
tors
Nomenclature
Name Functions
1. Main display Displays process values, parameters, and set values.
2. Status indicators OUT1 Lit when output 1 is ON.
OUT2 Lit when output 2 is ON.
SV Lit when a set value is being displayed or changed.
T Lit when the teaching function is enabled. Flashes when the K3GN is in teaching operation.
Lit when a calibration value is being displayed during user calibration. Flashes while reading a calibra-
tion value.
ZERO Lit while the forced-zero function is activated.
HOLD Lit when HOLD input is ON.
CMW Lit when communications writing is “enabled” and is out when it is “disabled.”
3. Level indicator Displays the current level that the K3GN is in. (See below for details.)
4. Level Key Used to change the level.
5. Mode Key Used to allow the Main display to indicate parameters sequentially.
6. Shift Key Used to enable that set value to be changed. When changing a set value, this key is used to move
along the digits.
7. Up/Zero Key Used to change a set value. Used to set or clear a forced-zero function when a measurement value is
being displayed.
1. Main display
2. Status indicators
3. Level indicator
4. Level key
2. Status indicators
7. Up/Zero key 6. Shift key 5. Mode key
Level indicator Level
p
Protect
Not lit Operation
a
Adjustment
s
Initial setting
c
Communications setting
f
Advanced function setting
u
User calibration