Omron HEM-7322T-E, Instruction Manual

Page: 21 / 422

19
3. Using the Device
EN
To Use the Guest Mode
The monitor stores measurement values for 2 users in the memory. The guest mode
can be used to take a single measurement for another user. No measurement
values are stored in the memory when the guest mode is selected.
1.
Press and hold the [START/STOP]
button for more than 3 seconds.
The USER ID symbol and the Date/Time display will disappear.
2.
Release the [START/STOP] button when the Date/Time
display turns off.
The arm cuff will automatically start to inflate.
DO NOT adjust medication based on measurement results from this blood pressure monitor. Take
medication as prescribed by your physician. Only a physician is qualified to diagnose and treat high
blood pressure.
Always consult your physician. Self-diagnosis of measurement results and self-treatment are
dangerous.
Read “What to do if your systolic pressure is more than 210 mmHg” (page 16) of this instruction
manual, if your systolic pressure is known to be more than 210 mmHg. Inflating to a higher pressure
than necessary may result in bruising of the arm where the cuff is applied.
HEM-7322T-E_D_M.fm Page 19 Friday, July 27, 2018 12:03 PM