Omron H7BR Series, Manual

Page: 15 / 22

H7BR
H7BR
15
■
SIDE VIEW
All DIP switches are set to OFF at the factory.
ON OFF
Not used – –
Output level H L L H
Not used – –
AUX power 24 VDC 12 VDC
Model Switch no. 1 2 3 4
Operation of each transistor Invalid External power
output when count up supply
Single preset OFF — Output OFF to ON — 12 VDC
ON — Output ON to OFF — 24 VDC
Double preset OFF Output 1 Output 2 — 12 VDC
OFF to ON OFF to ON
ON Output 1 Output 2 — 24 VDC
ON to OFF ON to OFF
Model H7BR-B (standard) H7BR-C (+/– range)
Present count 0 0
Presets 0 0
Batch count 0 Not applicable
Batch count preset 0 Not applicable
Input mode Up Reversible C (phase difference)
Output mode N K
Output 2 time Hold 1,000 ms
Output 1 time (2-stage only) Hold 1,000 ms
CP1 and CP2 counting speeds 30 cps 30 cps
Min. reset time 20 ms 20 ms
Decimal point Far right (no fractions) Far right (no fractions)
Scale factor 1,000 1,000
Compensation Not applicable 0
Key protection level KP-1 KP-1
although power supply is required for inputs and outputs to
operate. Outputs are not possible with the presets set to zero.
The following data is set at the factory. Be sure to make any
setting changes before operating the counter. Setting and
display changes are possible with or without power supplied,
■
FACTORY SETTINGS