background image

CSM_H5L_DS_E_2_2

1

Daily Time Switch

H5L

Weekly Control with a Large Time Display

Easy Programming with Large Display and Interactive 
Functions.

• Easy operation with five keys.

• Up to 24 steps of ON/OFF operations can be set.

• Power supply freely selectable from 100 to 240 VAC.

• Memory protection during power failure for up to 10 years.

• Certified for UL and CSA safety standards.

• The same setting can be used for multiple-day operation and 

timer operation. 

Refer to 

Safety Precautions for All Timers

.

Refer to 

Safety Precautions

 on page 12

96 mm

96 mm

For the most recent information on models that have been certified for 
safety standards, refer to your OMRON website.

Ordering Information

Specifications

Time Ranges

Ratings

Wiring

Backup power supply function for memory 

protection

No. of program steps

Model

Screw terminals

Provided (approx. 10 years at 25

°

C)

24 (Each ON or OFF is considered to be one step.)

H5L-A

Rated time

Time setting range

Time division

24 hrs x 7 days

00:00 to 23:59

1 min

Rated supply voltage

100 to 240 VAC (50/60 Hz)

Operating voltage range

85% to 110% of rated supply voltage

Power consumption

Approx. 4 VA at 240 VAC

Control outputs

15 A at 250 VAC, resistive load at 50

°

C

12 A at 250 VAC, resistive load at 55

°

C

Minimum applied load: 100 mA at 5 VDC (failure level: P, reference value)

Summary of Contents for H5L Series















Reviews: