background image

GI-SMD/SID

2

Specifications

Regulations and Standards

GI-S-series safety I/O terminals

• The FSoE protocol was certified for applications in which OMRON FSoE devices are connected to each other.For compatibility with FSoE

devices other than OMRON FSoE devices, the customer must validate FSoE communications.

By using GI-S-series safety I/O terminals, you can build a safety control system that meets the followings.

• Requirements for SIL 3 (Safety Integrity Level 3) in IEC 61508, IEC/EN 62061, (Functional Safety of Electrical/Electronic/Programmable

Electronic Safety-related Systems)

• Requirements for PLe (Performance Level e) and for safety category 4 in EN ISO13849-1

Also, GI-S-series safety I/O terminals have been registered for conformity to RCM, EAC, and KC (Korean radio regulation).

General Specifications

Certification body

Standards

TÜV Rheinland

• EN ISO 13849-1

• IEC 61508 parts 1-7

• IEC/EN 62061

• IEC/EN 61131-2

UL

• NRAG (UL 61010-1, UL 61010-2-201 and UL 121201)

• NRAG7 (CSA C22.2 No. 61010-1, CSA C22.2 No. 61010-2-201 and CSA C22.2 No. 213)

Item

Specification

Enclosure

Mounted in a panel (open type)

Operating 

environment

Ambient operating temperature

0 to 55°C

Ambient operating humidity

10% to 95% (with no condensation or icing)

Atmosphere

Must be free from corrosive gases

Ambient storage temperature

25 to 70°C (with no condensation or icing)

Altitude

2,000 m max.

Pollution degree

2

Insulation class

CLASS III (SELV)

Overvoltage category

II

EMC immunity level

Zone B: IEC 61131-2

Vibration resistance

Conforms to IEC 60068-2-6

5 to 8.4 Hz with amplitude of 3.5 mm

8.4 to 150 Hz, acceleration of 9.8 m/s

2

100 min. in each X, Y, and Z directions (10 sweeps of 10 min. each = 100 min. total)

Shock resistance

Conforms to IEC 60068-2-27

147 m/s

2

3 times in each X, Y, and Z directions

Insulation resistance

20 M

Ω

 between isolated circuits (at 100 VDC)

Dielectric strength

500 VAC between isolated circuits for 1 minute at a leakage current of 10 mA max.

Installation method

DIN Track mounting (IEC 60715 TH35-7.5/TH35-15)

Degree of protection

IP20

Summary of Contents for GI-SMD/SID









Reviews: