GI-SMD/SID
4
*1.
OMRON special safety input devices are the following input devices:
• Safety mat UMA/UM
• Safety edge SGE
• Single-beam safety sensor E3ZS
• Non-contact door switch D40A/D40Z
*2.
GI-SID1224 has no output signal terminal and no output power supply is connected.
*3.
Projections are not included.
*4.
Inrush current when the supply power is turned ON from the static power-OFF state. Inrush current value may vary depending on conditions.
For your selection of fuses, breakers, and external power supply units, take into account the conditions to be used to select those that have a
margin in characteristics and capacity.
*5.
Current-carrying capacity allowed to continuously flow through the terminal. This current must not be exceeded in case crossover wiring is
done for the unit power supply.
Built-in EtherNet/IP port specifications
This section describes the field bus specifications of the safety I/O terminal.
Inter-terminal
connection
diagram
V0/G0
Unit power supply
V1/G1
Output power supply
*
2
Installation direction and restriction
No restriction
Protective function
Overvoltage protection, overcurrent protection
Item
Specifications
GI-SMD1624 / GI-SID1224
Communications protocol
TCP/IP, UDP/IP
Support services
Sysmac Studio connection, CIP message communication, DHCP (client)
Number of logical ports
2
Physical layer
100BASE-TX
Transmission
specifications
Media access method
CSMA/CD
Modulation
Baseband
Transmission path
Star, daisy chain, mixed (star and daisy chain)
Transmission rate
100M bit/s (100BASE-TX)
Transmission media
Twisted-pair cable (shielded: STP): category 5/5e or higher
Transmission distance
100m max. (distance between hub and node)
Number of daisy chain connections
8 units
CIP messaging service:
Explicit message
UCMM (non-connection type)
Maximum number of clients that can communicate simultaneously: 8/Logical ports
Implicit (I/O)
connection
Exclusive Owner (EO)
connection
1
EtherNet/IP conformance test
CT9 compliant
Ethernet interface
100BASE-TX
Auto Negotiation
Auto-MDI
Model
GI-SMD1624
GI-SID1224
V0
V0
G0
G0
Unit power supply terminal
(Top terminal block)
Crossover wiring of
crossover terminal
V1
NC
V1
G1
G1
Unit power supply terminal
(Bottom terminal block)
Crossover wiring of
crossover terminal
