J-20
Solid State Relays
G3NE
Dimensions
Note:
All units are in millimeters unless otherwise indicated.
Safety Precautions
■
Precautions for Correct Use
Please observe the following precautions to prevent failure to
operate, malfunction, or undesirable effect on product performance.
Do not apply excessive force to the terminals. Be careful when
pulling or inserting the terminal clips for the Quick Connector (QC).
When attaching a heat sink to the G3NE, in order to facilitate heat
dissipation, apply heat-conductive grease on the heat sink. Tighten
the mounting screws of the heat sink with a torque of 0.59 to
0.98 N·m.
30
±
0.2
3 +
4
−
1
2
14.5
6.5
7.1
2.9
7.95
3
6
30+0.5
G3NE-205T(L)/210T(L)/220T(L)(-2)-US
Mounting Holes
Two, 3.5-dia. or M3 holes
Output
Load
Input
37.5 max.
3.5 dia. hole
11.5 max.
* G3NE-2
@@
T(L)-2-US: Two, #187 (t=0.5) (Faston tab or equivalent)
47.5
max.
Two #110 (t = 0.5) (Faston
tab or equivalent)*
Two #250 (t = 0.8) (Faston
tab or equivalent)
Terminal Arrangement/
Internal Connections
(Top View)
Input
voltage
Load power
supply
5.6
47.6
90
±
0.3
35 30.5
±
0.3
30
5
4.5
6
35
±
0.2
90
±
0.4
35 30.5
±
0.3
47.6
90
±
0.3
5.6
30
5
4.5
28
13
35
±
0.2
90
±
0.4
Mounting Holes
Y92B-N100
4.6 dia. hole
Two, M3 holes
Two, M4 holes
77 max.
100 max.
44 max.
47 max.
51 max.
4.6 dia. hole
Two, M3 holes
77 max.
100 max.
71 max.
100 max.
75 max.
Two, 3.2-dia. holes
Mounting Holes
Weight: approx. 200 g
Weight: approx. 400 g
Heat Sink
Y92B-N50
Two, 3.2-dia.
holes
Two, M4
holes
Two, 4.4-dia.
or M4 holes
Two, 4.4-dia.
or M4 holes
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. K062-E1-05
