Camera 4ch type
FZ5-110
□
-10
FZ5-60
□
-10
Camera 2ch type
FZ5-110
□
FZ5-60
□
308
260
(Unit: mm)
4-M3 Depth 6
Controller External Dimensions
•
LCD integrated type
246
296
130
110
7
6
68
(
)
7
( )
6
+
-
(
)
28.4
12.8
10
33
(163.5)
A
20
120
120
20
120
120
Controller Specifications
LCD integrated type: Touch pen, mouse etc.
RS-232C/422: 1 channel
Ethernet 100BASE-TX/10BASE-T
Use Ethernet port.
Transmission speed : 100Mbps(100BASE-TX)
17 inputs (RESET, STEP0/ENCTRIG_Z0, STEP1/ENCTRIG_Z1, DSA0 to 1, ENCTRIG_A0 to 1,
ENCTRIG_B0 to 1, DI0 to 7)
29 outputs (RUN/BUSY1, BUSY0, GATE0 to 1, OR0 to 1, READY0 to 1, ERROR, STGOUT0 to 3, DO0 to 15)
LCD integrated type: Integrated Controller and 12.1 inch TFT color LCD
(Resolusion: XGA 1024
×
768)
4 channels (supports USB1.1 and 2.0)
24 V DC (20.4 to 26.4 V DC)
Consumption of current varies depending on the type of camera connected.
When FZ-S_/FZ-S_2M/FZ-S_5M_ is connected: Approx. 4.9 A max.
When FZ-SP_/FZ-SF_/FZ-SH_ is connected:
Approx. 4.9 A max.
When FZ-SLC___/FZ-SZC___ is connected: Approx. 7.5 A max.
When FZ-SQ___ is connected: Approx. 7.5 A max.
Between the group of external DC terminals and the ground terminal: 20M
Ω
min.
(DC100V megger, with internal surge absober removed)
Between the group of external DC terminals and the ground terminal: 1,000 V
AC, 50/60 Hz
10 mA max.
2 kV, pulse rise: 5 ns Pulse width: 50 ns
Burst continuing time: 15 ms Cycle: 300 ms
10 to 150 Hz, one-side amplitude 0.1 mm (Max. acceleration 15m/s
2
)
10 times for 8 minutes for each three direction
150 m/s
2
; 3 times each in 6 directions
Operating: 0 to +50 °C (with no icing or condensation)
Ambient temperature specifiable. The cooling fan speed can be switched
according to the setting.
0 to +45 °C: Low speed, 0 to +50 °C: High speed
Storage: –20 to +65 °C (with no icing or condensation)
Operating and storage: 35 % to 85 % (no condensation)
No corrosive gases
D-type ground (ground resistance 100
Ω
or less) * conventional class 3 ground
IEC60529 IP20
Indoor use
Maximum altitude of 2,000 m
Supply voltage fluctuations of +10 %, –15 % of the rated voltage
Installation category I
Pollution degree 2
ABS
LCD integrated type: Approx. 3.4 kg
（
for 4 camera type
）
/ Approx. 3.2 kg
（
for 2 camera type
）
Operation
Serial communications
Network communications
EtherNet/IP communication
(Exclude FZD)
Parallel I/O
Monitor interface
USB interface
Power supply voltage
Current consumption
(At Power supply voltage
24 V DC)
Insulation resistance
Dielectric strength
Leakage current
Noise resistance
Vibration resistance
Shock resistance
Ambient temperature
range
Ambient humidity range
Ambient environment
Ground
Degree of protection
Environmental conditions
(according to
IEC61010-1)
Case materials
Weight
OMRON Corporation
Suitability for Use
EUROPE
OMRON EUROPE B.V. Sensor Business Unit
Carl-Benz Str.4, D-71154 Nufringen Germany
Phone:49-7032-811-0 Fax: 49-7032-811-199
NORTH AMERICA
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,IL 60173-5302 U.S.A.
Phone:1-847-843-7900 Fax : 1-847-843-7787
ASIA-PACIFIC
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road #05-05-08(Lobby 2),
Alexandra Technopark, Singapore 119967
Phone : 65-6835-3011 Fax :65-6835-2711
THE PRODUCTS CONTAINED IN THIS SHEET ARE NOT SAFETY RATED.
THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF
PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY
COMPONENT OR PROTECTIVE DEVICE FOR SUCH PURPOSES.
Please refer to separate catalogs for OMRON's safety rated products.
OMRON shall not be responsible for conformity with any standards, codes,
or regulations that apply to the combination of the products in the
customer's application or use of the product.
Take all necessary steps to determine the suitability of the product for the
systems, machines, and equipment with which it will be used.
Know and observe all prohibitions of use applicable to this product.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS
A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
See also Product catalog for Warranty and Limitation of Liability.
CHINA
OMRON(CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Phone : 86-21-5037-2222 Fax :86-21-5037-2200
OCT. 2009
D
A = 104（for 4 camera type）
83（for 2 camera type）
