7-3 Partial muting configuration
17
7-3
Partial muting configuration
This feature is available only on the F3S-TGR-SBx-K3C and F3S-TGR-SBx-K4C models.
It gives the users the opportunity to mute only half of the light curtain. The other half remains active.
The configuration of this function is done by setting the internal dip switches 1 & 2.
For correct configuration and identification of dip switch and bypassed optics refer to the following drawing
and table.
Dip-Switch
Muted Beams
1
2
OFF
OFF
All 4 optics (Default setting)
OFF
ON
Only TX1 - RX1
ON
OFF
Only TX2 - RX2
ON
ON
NOT ALLOWED
TX2
RX2
TX1
RX1
CONNECTOR SIDE.
Summary of Contents for F3S-TGR-SB2-KXC
