!
7-1
Section
Maintenance Parts and Replacement
56
7-1
Maintenance Parts and Replacement
Maintenance parts of the F150 are shown in the following table.
Part
Model No.
20-mm Lens (20 mm
×
20 mm)
F150-LE20
50-mm Lens (50 mm
×
50 mm)
F150-LE50
Light
F150-LT10
Note
1. The Light will gradually lose illumination if used for long peri-
ods (approx. 20% loss after 1,500 hours of use). Replace
the Light after approx. 1,500 hours of use.
2. Replace the Light if it is partially damaged or not fully func-
tioning.
Replacing the Lens or Light
Camera base
Hold this section of the
lens when removing.
Light connector Camera cable
connector
Hold this section when
removing the Cable.
1
Disconnect the light cable from the light connector on the
back of the Camera.
2
Remove the light cable from the slot in the camera base.
3
Remove the two M3
×
6 screws securing the Light.
4
Remove the Light from the Camera.
5
Remove the Lens from the camera mount.
Note
Follow these steps in the reverse order to mount the Lens and
Light.
Caution
Do not disassemble the Lens. Disassembly can damage the
Lens.
Summary of Contents for F150-2
