5-6
Section
Multi-vendor Applications
44
5-5
LED Indicators
The status of CompoBus/D communications is indicated by the
MS and NS indicators.
MS (Module Status) Indicator
The MS indicator shows the status of node (F150) itself. The indi-
cator will be lit green when the F150 is operating normally.
NS (Network Status) Indicator
The NS indicator shows the status of network. The indicator will
be lit green when the network is operating normally.
Note
The MS and NS indicators are lit in green or red. The status of
these indicators (lit, flashing, or not lit) can be used to determine
what error has occurred.
→
p. 54
5-6
Multi-vendor Applications
Use the Vision Sensor’s specifications as well as the Device Pro-
tocol and Object Mounting information shown in the following ta-
bles when the F150-C10E-2-DRT is connected to another com-
pany’s Master.
Device Protocol
General data
Compatible DeviceNet
Specifications
Volume I - Release 2.0
Volume II - Release 2.0
Vendor name
OMRON Corporation, vendor ID = 47
Device type
Generic, protocol number = 0
Product code
203
Physical
conformance
d t
Network current
consumption
55 mA max.
data
Connector type
Open plug
Physical insulation
Yes
Supported indicators
Module, Network
MAC ID setting
DIP switch
Default MAC ID
0
Baud rate setting
DIP switch
Supported baud rates
125K bps, 250K bps, and 500K bps
Communications
data
Predefined Master/Slave
connection set
Group 2 only server
Dynamic connection support
(UCMM)
No
Explicit message
fragmentation support
Yes
Summary of Contents for F150-2
