!
3-2
Section
Crimp Terminals and Cables
26
3-1
Terminal Block Application
The following table shows the functions that can be performed by
the F150-2 using the terminal blocks. Refer to the
Auto Menu
and
Expert Menu Operation Manuals
for communications settings
and I/O formats.
3-2
Crimp Terminals and Cables
The terminal block uses M3 terminal screws. Use appropriate
crimp terminals for M3 screws, as shown below. Tighten the
screws to a torque of between 0.5 and 0.6 N
⋅
m.
Confirm that wiring and tightening have been done properly.
Use a cable length not exceeding 30 m.
Caution
Cover the terminal blocks with the Terminal Block Protection
Covers.
Forked
Round
6.2 mm max.
6.2 mm max.
Applicable wire size:
Insulated wire of 1.31 to 1.65 mm
2
(AWG16 to AWG15)
Summary of Contents for F150-2
