E8MS/E8M
11
Nomenclature
Pressure Sensor Controller
E8M-MP8
Switch output indicators (red): Lit when OUT1 (CH1 to CH4) and OUT2 (CH1 only) are ON.
LCD display (orange):
Displays the present pressure status, setting mode status, display unit, and error code.
Up Button:
Used to select the mode and increase ON/OFF set values.
Down Button:
Used to select the mode and decrease ON/OFF set values.
SET Button:
Used to change modes and enter set values.
Unit indicators (orange):
The selected unit indicator will light. Only the SI units (i.e., Mpa or kPa) can be used.
Channel display (red):
The channel selected from CH1 to CH4 is displayed.
Accessories
Panel Mounting Adapter . . . . . . . . . . . . . . . . . . . . . . Y92F-37-S (M3 x 8L, two provided)
Options
Power and Output Connector Cable (2 m) . . . . . . . E89-M5-S
Protective Front Cover . . . . . . . . . . . . . . . . . . . . . . . Y92A-40-S
48 x 48 Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . Y92F-48-S
(This Adapter is to mount the E8M-MP8 in the panel cutout dimensions for the K3C Series.)
Unit indicator (orange)
LCD display (orange)
Channel display (red)
Switch output indicators (red)
Up Button
SET Button
Down Button
Sensor Connector
Power and Output Connector Cable
Water-proof Packing (Accessory)
Protective Front Cover
48 x 48 Adapter
Panel Mounting Adapter (Accessory)
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
