E8MS/E8M
4
E8M
* The absolute pressure value of each port is 100 kPa.
Item
Model
E8M-A1-S
E8M-10
E8M-N0
Power supply voltage
12 VDC ±10%, ripple (p-p) of 5% max.
Current consumption
30 mA max.
Pressure type
Differential pressure
Gauge pressure
Applicable fluid
Non-corrosive gas and non-flammable gas
Rated pressure range
Differential pressure from 0 to
1,000 Pa between positive and
negative ports
0 to 1 MPa
0 to
−
101 kPa
Withstand pressure
Differential pressure from 0 to
2,500 Pa between positive and
negative ports
*
1.5 MPa
400 kPa
Accuracy
±3% FS max.
±5% FS max.
Linearity
±1% FS max.
Hysteresis
±1% FS max.
Linear output
Voltage output: 1 to 5 V with an output impedance of 1 k
Ω
Protection circuits
Reverse polarity protection, load short-circuit protection
Ambient temperature
range
Operating: 0 to 40°C
Storage:
−
15 to 50°C (with no icing)
Ambient humidity range
Operating/Storage: 35% to 85% (with no condensation)
Temperature influence
±0.25% FS/°C max.
±0.12% FS/°C max.
Voltage influence
±3% FS max.
Insulation resistance
100 M
Ω
min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
1,000 VAC for 1 minute
Vibration resistance
Destruction: 10 to 150 Hz, 0.75-mm single amplitude or 100 m/s
2
, 4 times each for 8 min in X, Y and Z directions
Shock resistance
Destruction: 300 m/s
2
3 times each in X, Y and Z directions
Degree of protection
IP50 (IEC60529)
Pressure port
M5 female screw
R (PT) 1/8 and M5 female screw
M5 male screw
Connection method
Pre-wired cable
(standard length: 3 m)
Connector
Weight (packed state)
Approx. 130 g
Approx. 30 g
Approx. 20 g
Material
Pressure port
Stainless steel (SUS303)
Stainless steel (SUS304)
Case
ABS
Aluminum, polyether sulfonic resin
Accessories
Pin Controller Connector,
instruction manual
Instruction manual
Pressure
generator
E8M-A1
100 mm
Measurement method
Downloaded from
Downloaded from
Downloaded from
Downloaded from
