E5
j
K-T
E5
j
K-T
34
Parameter Operation
Refer to the
E5AK-T/E5EK-T/E5CK-T User’s Manual (H88/H89/H90) for each parameter and the calibration mode in detail.
Refer to page 13 for the setting in detail.
Level 0 Mode
Process Value
Set Point
Pattern Number
(With E5CK, this display appears when more than
two patterns are used.)
Step Number Monitor
Hold
Advance
Standby Time (displays remaining time) Monitor
Pattern Elapsing Time Monitor
Pattern Execution Count Monitor
MV Monitor (heating)
(Control Valve Control)
(Heating/Cooling Control)
MV Monitor
(Cooling)
MV
Valve Opening
MV
Time
Time
Number of times
Measured
value
Protect Mode
Under this mode, key operations are invalidated for the Auto/Manu-
al and Run/Reset.
Press 1 s min.
simultaneously.
Security
Key protect
To level 0
Press 1 s min.
simultaneously.
RUN/RST
RUN/RST
0
Security
Before starting operation, apply key protection to the parameters
that will not be changed during operation in order to prevent any ac-
cidental parameter changes.
Depending on the set values for the Security parameter (protect
mode), ranges of parameter application will be restricted. The fol-
lowing table shows relationship between the set values and the
scope of protection.
Mode
Set value
0
1
2
3
4
5
6
Calibration
Yes
No
No
No
No
No
No
Option
Yes
Yes
No
No
No
No
No
Expansion
Yes
Yes
No
No
No
No
No
Setup
Yes
Yes
No
No
No
No
No
Level 2
Yes
Yes
Yes
No
No
No
No
Level 1, 0
Yes
Yes
Yes
Yes
No
No
No
Program
Yes
Yes
Yes
Yes
Yes
No
No
Level 0
Yes
Yes
Yes
Yes
Yes
Yes
*
Note:
*Only the “Process Value/Set Point” parameter display is
possible.
When the set value is “0,” protection will not be applied.
When the set value is “5,” only the parameter in the level 0 mode can
be used and not possible to change to the menu screen.
When the set value is “6,” only the “Process Value/Set Point” can be
monitored.
The default setting is “1.”
Manual Mode
Process value
Manipulated variable/
Valve opening monitor
MANU indicator
+
+
Press simul-
taneously 1 s
min.
Press simultaneously
1 s min.