E5
j
K-T
E5
j
K-T
2
Compact and Easy-to-use Controllers
Programming is as easy as following the steps below.
Program can be set in pattern 0 according to the following proce-
dure.
Step 1
Step 2
Step 3
100
50
SP
0.20
0.40
0.20
Time: hours and minutes
Step No.
Target value
Time
(hours.minutes)
0
50
0.00
1
100
0.20
2
100
0.40
3
50
0.20
1. Press the Display Key to shift to the display
for the number of steps.
5no
0
8
Parameter for the number of
steps used
Number of steps
(Default setting: 8)
Pattern No.
Display key
2. Press the Down Key and set the number of
steps.
5no
0
4
Four steps in this case
Down key
3. Press the Display Key to shift to the display
for the target value of step 0.
Step 0
Parameter of the target value
Target value
(Default setting: 0)
5p0
0
0
Display key
4. Set the target value to “50.”
5p0
0
50
Target value
Up key
5. Press the Display Key to shift to the display
for the time of step 0.
ti0
0 000
Time parameter for step 0.
Step time
(Default setting: 0.00)
Pattern No.
Display key
6. Press the Display Key again with the step
time set at 0 minutes, and the target value
parameter for step 1 will be displayed.
5p1
0
0
Display key
7. Press the Up Key to increment to “100.”
5p1
0 100
Up key
In the same manner, set the time for step 1, tar-
get value for step 2, time for step 2, etc.
When the target value and time settings are
complete, press the Display Key.