Omron E5 K-T -, Manual, Page: 10 / 44

E5CK-T E5CK-T
10
Temperature Ranges
Platinum Resistance Thermometer
Input (switch selectable) JPt100 Pt100
Range
°
C –199.9 to 650.0 –199.9 to 650.0
°
F –199.9 to 999.9 –199.9 to 999.9
Resolution (
°
C/
°
F)
(main setting and alarm)
0 1
Thermocouple
Input (switch
selectable)
(see note)
K1 K2 J1 J2 T E L1 L2 U N R S B W PL II
Range
°
C –200
to
1,300 0.0 to
500.0 –100
to
850 0.0 to
400.0 –199.9
to
400.0 0 to
600 –100
to
850 0.0 to
400.0 –199.9
to
400.0 –200
to
1,300 0 to
1,700 0 to
1,700 100
to
1,800 0 to
2,300 0 to
1,300
°
F –300
to
2,300 0.0 to
900.0 –100
to
1,500 0.0 to
750.0 –199.9
to
700.0 0 to
1,100 –100
to
1,500 0.0 to
750.0 –199.9
to
700.0 –300
to
2,300 0 to
3,000 0 to
3,000 300
to
3,200 0 to
4,100 0 to
2,300
Resolution
(
°
C/
°
F)
(main setting
and alarm)
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Note: Setting number is factory-set to 2 (K1).
Current/Voltage
Input (switch selectable) Current input Voltage input
4 to 20 mA 0 to 20 mA 1 to 5 V 0 to 5 V 0 to 10 V
Range
One of following ranges depending on results of scaling
–1999 to 9999
–199.9 to 999.9
–19.99 to 99.99
–1.999 to 9.999
Resolution (
°
C/
°
F)
(main setting and alarm)
17 18 19 20 21
Specifications
Ratings
Item 100- to 240-VAC type 24-VAC/VDC type
Supply voltage 100 to 240 VAC, 50/60 Hz 24 VAC/VDC, 50/60 Hz
Power consumption 15 VA 6 VA, 3.5 W
Operating voltage range 85% to 110% of rated supply voltage
Sensor input Thermocouple: K, J, T, E, L, U, N, R, S, B, W, PL II
Platinum resistance thermometer: JPt100, Pt100
Current input:
4 to 20 mA, 0 to 20 mA
Voltage input: 1 to 5 V, 0 to 5 V, 1 to 10 V
Input impedance Current input: 150
Ω
Voltage input: 1 M
Ω
min.
Control output According to Output Unit (see
Output Unit Ratings and Characteristics)
Auxiliary output SPST-NO, 3 A at 250 VAC (resistive load)
Control method ON/OFF or 2-PID control
Setting method Digital setting using front panel keys
Indication method 7-segment digital display and LEDs
Other functions Standard
Manual output, heating/cooling control, SP limiter, loop burnout alarm, MV limiter, MV change
rate limiter, input digital filter, input shift, run/reset, protect functions, scaling function