![background image](http://html1.mh-extra.com/html/omron/e4c-uda/e4c-uda_instruction-manual_741350016.webp)
- 16 -
Keylock
Initializing all Setting Data (initialization processing)
The head type setting is not cleared even if all setting data is initialized.
Refer to "1. Setting the Head Type" in "6. Basic Settings."
J
Setting method
J
Cancel method
J
Setting method
RUN
SET
The sub-display flashes twice,
and key entry is disabled.
Hold down the UP key for more
than 3 seconds with the MODE
key pressed.
Press the MODE key and then
immediately press the UP key.
Switch to the RUN mode.
+
LOC
ON
RUN
SET
The sub-display flashes twice,
and key entry is enabled.
Hold down the UP key for more
than 3 seconds with the MODE
key pressed.
Press the MODE key and then
immediately press the UP key.
Switch to the RUN mode.
+
LOC
OFF
RUN
SET
Hold down the UP and DOWN keys for
more than 3 seconds.
Switch to the SET mode.
+
NO?
YES?
INIT
NO?
INIT
GOOD
When "YES?" is displayed,
press the MODE key.
Initialization is completed.
Data is
initialized.
Data is not
initialized.
1636705-7A_e4c-uda_E.fm 16 ページ 2005年11月15日 火曜日 午後4時58分