- 15 -
Setting the Display to Zero (zero reset)
Before making this setting, make sure that the "MODE key setting" is set to [0RST] (zero reset).
The default setting is [2PNT] (teaching with and without a workpiece). (Refer to "Function Transition Charts" in "5. Function
Overview.")
Setting the Display to Any Value (offset)
Before making this setting, make sure that the "MODE key setting" is set to [oFST] (offset).
The default setting is [2PNT] (teaching with and without a workpiece). (Refer to "Function Transition Charts" in "5. Function
Overview.")
Inverting the Increment/decrement Direction of the Main Display (display inversion)
When display inversion is executed, how the display to the reference distance is indicated is inverted.
Before making this setting, make sure that the MODE key setting is set to [0RST] (zero reset) or [oFST] (offset).
7. Handy Ways of Setting Functions
J
Setting method
J
Cancel method
J
Setting method
J
Cancel method
J
Setting method
J
Cancel method
RUN
SET
Current distance Threshold
value
The zero reset is
executed, and the
current distance display
changes to "0".
Hold down the MODE key
for more than 3 seconds.
The current distance
display stops fluctuating.
Switch to the RUN mode.
RUN
SET
Hold down the DOWN key for more
than 3 seconds
with the MODE key pressed.
Press the MODE key and then
immediately press the DOWN key.
Switch to the RUN mode.
+
Current distance Threshold
value
The zero reset is
canceled.
RUN
SET
Current distance Threshold
value
Press the UP or DOWN
key to change the
current distance.
Hold down the MODE key
for more than 3 seconds.
The current distance
display stops fluctuating.
Switch to the RUN mode.
Press the MODE key to
execute offset.
RUN
SET
The offset is
canceled.
Hold down the DOWN key for more
than 3 seconds with the MODE key
pressed.
Press the MODE key and then
immediately press the DOWN key.
Switch to the RUN mode.
+
Current distance Threshold
value
RUN
SET
Press the UP
or DOWN key
to change the
current
distance.
(In the zero reset mode)
(In the offset mode)
Press the
MODE key to
execute display
inversion
together with
the offset.
Display inversion is
executed together
with the zero reset.
+
Hold down the UP key for more
than 3 seconds with the MODE
key pressed.
Press the MODE key and then
immediately press the UP key.
Switch to the RUN mode.
Current
distance
Current
distance
Threshold
value
Threshold
value
Both zero reset (offset) and
display inversion are
canceled.
RUN
SET
Hold down the UP key for more
than 3 seconds with the MODE
key pressed.
Press the MODE key and then
immediately press the UP key.
Switch to the RUN mode.
+
Current
distance
Threshold
value
1636705-7A_e4c-uda_E.fm 15 ページ ２００５年１１月１５日 火曜日 午後４時５８分
