background image

Proximity Sensors Technical Guide

General Precautions

For precautions on individual products, refer to the 

Safety Precautions

 in individual product information.

These products cannot be used in safety devices for 
presses or other safety devices used to protect human 
life.
These products are designed for use in applications for 
sensing workpieces and workers that do not affect safety.

To ensure safety, always observe the following precautions.

Wiring Considerations

Operating Environment

Do not use the Sensor in an environment where there are explosive or combustible gases.

WARNING

Precautions for Safe Use

Item

Typical examples

Power Supply Voltage

Do not use a voltage that exceeds the operat-
ing voltage range. Applying a voltage that is 
higher than the operating voltage range, or us-
ing an AC power supply (100 VAC or higher) 
for a Sensor that requires a DC power supply 
may cause explosion or burning.

DC 3-Wire NPN Output Sensors

DC 2-Wire Sensors

Load short-circuiting

Do not short-circuit the load. Explosion or 
burning may result.

The load short-circuit protection function op-
erates when the power supply is connected 
with the correct polarity and the power is 
within the rated voltage range.

DC 3-Wire NPN Output Sensors

DC 2-Wire Sensors

Even with the load short-circuit protection 
function, protection will not be provided when 
a load short circuit occurs if the power supply 
polarity is not correct.

Incorrect Wiring

Be sure that the power supply polarity and oth-
er wiring is correct. Incorrect wiring may cause 
explosion or burning.

DC 3-Wire NPN Output Sensors

Connection without a Load

If the power supply is connected directly with-
out a load, the internal elements may explode 
or burn. Be sure to insert a load when connect-
ing the power supply.

DC 2-Wire Sensors

Even with the load short-circuit protection 
function, protection will not be provided if 
both the power supply polarity is incorrect 
and no load is connected.

AC 2-Wire Sensors

Load

Sensor

Brown

Blue

Black

Load

Sensor

Brown

Blue

+

(Load short  
circuit)

Load

Sensor

Brown

Blue

Black

(Load short circuit)

Load

Sensor

Brown

Blue


+

+

+

Load

Load

Sensor

Brown

Black

Blue

Sensor

Brown

Blue

Black


+

Sensor

Brown

Blue

Sensor

Brown

Blue

http://www.ia.omron.com/

C-1

(c)Copyright OMRON Corporation 2007   All Rights Reserved. 

Summary of Contents for E2EC -


















Reviews: