18
4
Setting by PC Configurator Software
For the R7D series manufactured by M-System, the range of each channel can be set by using the PC Configurator
software.
The following sections describe how to set the range for each channel.
R7CON
Operating Environment
・
WindowsXP, Windows7 (32-bit/64-bit) or Windows10 (32-bit/64-bit) installed correctly
A DOS/V compatible personal computer.
To connect the device to the PC communication port, the configurator connection cable shown in the table
below is required.
Connection port
CONFIGURATOR CONNECTION CABLE FORMAT
RS-232-C
MCN-CON
USB
COP-US
Preparing to use R7CON
To use the Configurator software, you must install the software.
To write the configured data to the control module, the PC and the remote I/O converter must be properly
connected.
Installing R7CON
①
Start Windows.
②
Download the Configurator Software from the website of M-System Institute (https://www.m-
system.co.jp/download_w/dl_softwareE.html)) and save it on the local disc of your PC.
③
Check the size and version of the downloaded file.
File name: R7CON_R□. exe or R7CON_R□.zip □ contains the version.
④
Double-click to create R7CON folders.
⑤
Execute setup.exe in R7CON folders and follow the instructions of the installer to install.
Connection between PC and R7D
①
Connect the Configurator Kick ^ to the COM port or USB of the PC.
②
Connect the Configurator Connection Cable (Stereo Jack Side) to the setting connector on the R7D.
1 Setting the dip switch
To R7D-SV4/YV2's SW1-5, 6, 7, and
8
Turns all ON.
2 From the [Start] menu, select
[Programs]-[R7CON].
3 Start R7CON.