G-170
Safety Sensors / Components
Note: 1.
All units are in millimeters unless otherwise indicated.
2.
Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Key insertion
radius
(R
≥
170)
D4GS-N
#
T-
#
+ D4GS-NK1
D4GS-N
#
T-
#
+ D4GS-NK2
Red
Black
Red
Black
Key insertion face
Key insertion face
Key insertion face
D4GS-N
#
R-
#
+ D4GS-NK4
Red
Black
D4GS-N
#
T-
#
+ D4GS-NK4
Red
Black
Adjusting screw
(12.3
±
1)
(See note.)
Key insertion
radius
(R
≥
160)
13.5 to 16
Key insertion
position
Key insertion
radius
(R
≥
170)
(12.3
±
1)
(See note.)
13.5 to 16
Key insertion
position
Note:
Mount with dimen-
sion of 11.6 for
160
£
R
£
240.
Key insertion
radius
(R
≥
160)
13.5 to 16
Key insertion
position
Note:
Mount with dimen-
sion of 13 for
160
£
R
£
240.
Key insertion
radius
(R
≥
50)
Note 1:
When determining the opera-
tion key insertion radius, ad-
just the adjusting screw so
that the tip of the operation
key is positioned to the cen-
ter of the key insertion hole
of the Switch.
Note 2:
The operation key cannot be
inserted or adjusted in a
direction different from the
one shown above.
Use the D4GS-NK1 or
D4GS-NK2 if necessary.
5.4 to 7.9
Key insertion
position
Key insertion radius
(R
≥
160)
(21
±
1)
(See note.)
Key
insertion
face
5.4 to 7.9
Key insertion
positio
(21
±
1)
(See
note.)
Key insertion
radius
(R
≥
160)
Key insertion
face
5.4 to 7.9
Key insertion
position
Note:
Mount with dimen-
sion of 20.3 for
160
£
R
£
240.
Note:
Mount with dimen-
sion of 21.7 for
160
£
R
£
240.
Key insertion
radius
(R
≥
50)
Note 1:
When determining the opera-
tion key insertion radius, ad-
just the adjusting screw so
that the tip of the operation
key is positioned to the cen-
ter of the key insertion hole
of the Switch.
Note 2:
The operation key cannot be
inserted or adjusted in a
direction different from the
one shown above.
Use the D4GS-NK1 or
D4GS-NK2 if necessary.
Adjusting screw
21.5 to 24
Key insertion
position
21.5 to 24
Key insertion
position