background image

D4DS

D4DS

5

Operation

 Contact Form

Model

Contact

Diagrams

Remarks

D4DS-

j

5

j

S

1NC/1NO

11

12

23

24

Zb

11 - 12

23 - 24

Stroke

ON

Insertion
position

Fully-drawn
position

Only NC contact 11-12 has an
approved positive opening
mechanism.
The terminals 11-12 and 23-24 can
be used as opposing poles.

D4DS-

j

A

j

S

2NC

11

21

12

22

Zb

11 - 12

21 - 22

Stroke

ON

Insertion
position

Fully-drawn
position

NC contacts 11-12 and 21-22 have
an approved positive opening
mechanism.
The terminals 11-12 and 23-24 can
be used as opposing poles.

Note:

Terminals are numbered according to EN50013 and contacts are marked according to EN60947-5-1.

 Positive Opening Mechanism

1NC/1NO Contact (Slow-action)

2NC Contact (Slow-action)

Contact spring

Return spring

Fixed contact (NC)

Movable contact

Plunger

Fixed contact (NO)

Contact spring

Return spring

Fixed contact (NC)

Movable contact

Plunger

Only the NC contacts have a positive open-
ing function.
When metal deposition occurs, the contacts
are separated from each other by pushing in
the plunger.

Conforms to EN60947-5-1 Positive Opening

Both NC contacts incorporate a positive
opening function.
When metal deposition occurs, the contacts
are separated from each other by pushing in
the plunger.

Conforms to EN60947-5-1 Positive Opening

Note:

The switches are marked with “       ” indicating approval for the positive opening mechanism.

Summary of Contents for D4DS












Reviews: