Make numeral displays and input objects more attractive, and increase or decrease the character string font size as desired.
There is no need to create similar error screens, so you can easily create a device troubleshooter.
Troubleshooting Easily Supported with Multi-language Functionality
Greatly Enhanced Libraries of Beautiful
Lamps and Switches
10
11
Use an attractive font for numerals that looks good on the display even when it is enlarged. Seven-segment fonts are also available. And,
smooth fonts can be used for alarms and character strings, and scalable fonts can be selected. In addition, worldwide support is provided
with 42 languages, including Thai.
New 7-segment font
Thai
Alarm display with new scalable Gothic font
New numeral font
A selection of over 800 beautiful objects is
provided. Now, it's easier to allocate and change
objects.
Individual error display screens that were previously created for
each error can now be integrated into one. It is possible to switch
only the error details (text and
screen) without ladder
programming in conjunction with
the alarm bit
Multi-language machine troubleshooting can be easily achieved by saving the English
screen data in an Excel file, having it translated, and then importing the results.
CX-One version 2.1 newly supports Windows Vista, the latest
edition of the Microsoft OS.
CX-One can now be used on the latest computer OS. Version 2.1
also support Korean Windows. Transitioning and training onsite
will be easier in any application environment, even with the
expected expansion of tasks abroad. With CX-One version 2.1,
Korean display is possible for tool menus and comments in the
CX-Programmer, as well as for the installation windows.
With this system,
the frames are
shared, and the
error details in the
pink frames are
switched with an
alarm or other item
as the trigger.
Text selection
Screen selection
Support for the Latest Windows OS Vista
Further Expansion of Applications Environments with
Support for Korean
Ver. 2.1
Upgrade planned for the near future
Greater Beauty
Easier Design of Device Error Screens
Greater Beauty, Simpler,
and Better Multi-language Support
For example, in conjunction with an alarm bit (See note.)
Alarm bit 10.01 ON (no paper)
Alarm bit 10.02 ON (printing error)
Note
: Alarms, PLC/PT memory, and other items can be
selected for the switching trigger.
The following table shows the Support Software (Configuration Tools) installed by the CX-One Version 2.1.
FA Integrated Tool
Package CX-One
Version 2.1
FA Integrated Tool
Package CX-One
Lite Version 2.1
Name
Compatible OS
Description
Media
(See note 2.)
Model
Number of licenses
(See note 1.)
Computer
Memory (See notes 2.)
Hard disk
Display
Disk drive
Communications ports
Other
IBM PC/AT or compatible
with a processor
recommended by Microsoft.
CX-Programmer
Ver. 7.2
(Upgrade planned
CX-Integrator
Ver. 2.1
CX-Protocol
Ver. 1.7
CX-Simulator
Ver. 1.8
CX-Position
Ver. 2.4
CX-Motion-NCF
Ver. 1.5
Operating system (OS)
(See notes 1.)
Microsoft Windows98 SE
Microsoft Windows NT
(Service Pack 6a)
Microsoft Windows Vista
(except 64-bit edition)
(See note 4.)
Microsoft Windows 2000
(Service Pack 3 or higher) or
Microsoft Windows Me
Microsoft Windows XP
512 MB minimum,
1 GB recommended.
Item
Outline
Support Software
in CX-One
Outline
Support Software
in CX-One
Requirement
Approx. 2.2 GB or more available space is required to install the complete CX-One package.
SVGA (800 x 600) or better high-resolution display with 256 colors min. XGA or better display is required for the CX-Process Software.
CD-ROM drive or DVD drive
One RS-232C port min. (See note 3.)
Internet access is required to use online user registration, including a modem or other hardware connection method.
256 MB minimum, 512 MB recommended.
IBM PC/AT or compatible with a Pentium II 333 MHz or faster processor (Pentium III 1 GHz or faster recommended.)
SwitchBox Utility
Ver. 1.6
CX-Motion
Ver. 2.3
CX-Drive
Ver. 1.4
CX-Process Tool
Ver. 5.1
Faceplate Auto-
Builder for NS
Ver. 3.0
CX-Thermo Ver. 3.2
(See note 3.)
CX-FLnet
Ver. 1.0
CX-Motion-MCH
Ver. 2.1
CXONE-AL50D-EV2
CXONE-LT01C-EV2
CXONE-AL50C-EV2
CXONE-AL30D-EV2
CXONE-AL30C-EV2
CXONE-AL10D-EV2
CXONE-AL10C-EV2
CXONE-AL03D-EV2
CXONE-AL03C-EV2
CXONE-AL01D-EV2
CXONE-AL01C-EV2
1 license
3 licenses
10 licenses
30 licenses
50 licenses
1 license
CD
DVD
CD
DVD
CD
DVD
CD
DVD
CD
CD
DVD
Ordering Information
System Requirements
Support Software Contained in the CX-One Version 2.1
Windows 98 SE, Me, NT 4.0
(Service Pack 6a), 2000
(Service Pack 3 or higher), XP,
or Vista
Note
supported.
downloaded and updated
from the Microsoft
Download center of each
region.
CX-One is a comprehensive software package
that integrates Support Software for OMRON
PLCs and components.
CX-One Lite is a subset (see note 3) of the complete
CX-One package that provides only the Support
Software required for micro PLC applications. It can
be used only with micro PLCs. (See note 4.)
Note
1: Site licenses are available for users who will run CX-One on multiple computers. Ask your OMRON sales representative for details.
Note
2: When purchasing the DVD format, verify the computer model and DVD drive specifications before purchasing.
Note
3: CX-One Lite provides the following Support Software: CX-Programmer Ver. 7.2 (micro PLCs only), CX-Integrator Ver. 2.1, CX-Simulator Ver. 1.8, CX-Designer Ver. 2.1, CX-Protocol Ver. 1.7,
Note
4: The following micro PLCs are supported by CX-One Lite: CP1
@
, CPM
@@
, and SRM1.
Note
1: If the complete CX-One package is installed, approximately 1.9 GB of hard disk space will be
required.
3: Installation and operation are supported only for Microsoft Windows 2000 (Service Pack 3 or
higher) and XP.
CX-One OS Precaution: The CX-One will not run on Microsoft Windows 95 or any other OS not
listed above. If such an OS is being used on the client computer, the OS must be upgraded before
installing the CX-One. System requirements and hard disk space may vary with the system
environment.
The amount of memory required varies with the Support Software applications used in CX-One.
Refer to user documentation for individual Support Software for details.
Note
1:
Note
2:
An RS-232C port is required to connect the Support Software applications in CX-One to a PLC. If
the computer provides only a USB port, use a CS1W-CIF31 USB/RS-232C Conversion Cable. To
connect to a CP-series/NSJ-series PLC, however, an over-the-counter USB cable (type A-B) can be
used to connected to the built-in USB port on the CP-series/NSJ-series PLC.
The following restriction apply when using CX-One version 2.1 with Windows Vista.
• Some help files require downloading tool software provided by Microsoft. When connected to
the Internet, a page for downloading will be displayed if a help file that requires support software
is opened. (http://support.microsoft.com/kb/917607/en)
• Restrictions apply to operation of some applications. Refer to the Setup Manual for details.
Note
3:
Note
4:
Application software to create and debug programs for SYSMAC
CS/CJ/CP/NSJ-series, C-series, and CVM1/CV-series CPU Units.
Application software to simulate SYSMAC CS/CJ/CP/NSJ-series
CPU Unit operation on the computer to debug PLC programs
without a CPU Unit.
Application software to create and monitor data for SYSMAC
CS/CJ-series Position Control Units.
Application software to monitor and set parameters for SYSMAC
CS/CJ-series Position Control Units that support MECHATROLINK-II
communications. (See note 2.)
Application software to create protocols (communications sequences)
between SYSMAC CS/CJ/CP/NSJ-series or C200HX/HG/HE Serial
Communications Boards/Units/ Option Boards and general-purpose
external devices.
Application software to create data and motion programming and
perform monitoring for SYSMAC CS/CJ-series MCH Units that
support MECHATROLINK-II communications. (See note 2.)
Application software to create data for SYSMAC CS-series,
C200HX/HG/HE, and CVM1/Cvseries Motion Control Units, and to
create and monitor motion control programs.
Application software to create and debug function block programs
for SYSMAC CS/CJ-series Loop Controllers (Loop Control
Units/Boards, Process Control CPU Units, and Loop Control CPU
Application software that automatically outputs screen data as
project files for NS-series PTs from tag information in function
block programs created with the CX-Process Tool.
Application software to set and control parameters in components,
such as Temperature Control Units.
Application software for system setting and monitoring of SYSMAC
CS/CJ-series FL-net Units.
Utility software that helps debug PLCs. It helps to monitor the I/O
status and to monitor/change specified present values within a PLC.
CX-Profibus
Ver. 1.1
Software to configure a PROFIBUS Master.
Application software to set and control data for Inverters and
Application software to create screen data for the NS-series PT
Touch Panels.
Application software to build and set up FA networks, such as
Controller Link, DeviceNet, CompoWay/F, and Ethernet. The Routing
Table Component and Data Link Component can be started from this
software. DeviceNet Configuration functionality is also included.
