Failure
Transfer
Time
Retransfer
Completed
Transfer time onsite
8
9
Transfer to computer from a DeviceNet network can
be resumed!
The maximum number of Controller Link data link send
words per node has been increased from 1,000 to 4,000!
Easier Adjustment for Temperature and
Process Control!
If communications fail when uploading DeviceNet network data (slave
data) using the CX-Integrator, uploading can be resumed from the point
where failure occurred, thereby greatly shortening the time for
transferring network data to the computer.
Support is provided for Controller Link Units (
soon to be released
), which
have increased the maximum number of send/receive words per Unit
fourfold from the previous 1,000 words to 4,000 words when data links
are used (see note). This can be used to increase the amount of data
shared between PLCs, such as for exchanging data on quality.
Note
: CS1W-CLK13/23/53, CJ1W-CLK23, and 3G8F7-CLK13/23/53.
Version 3.2 of the CX-Thermo
Now, settings of parameters being
monitored in the Trend View Window can be
changed.
Easier Memory Allocation for the EJ1 and PLCs
Now, parameter selections and memory
allocations for programless communications
of the EJ1 and PLCs can be set in a table
while viewing the PLC memory address.
Ethernet
Routing tables can be transferred from one location to
multiple PLCs!
Routing tables can be set and transferred from one PLC to other PLCs on a network without reconnecting cables. (See note.)
Transferring routing tables is easy using a direct
Ethernet connection!
Routing tables can be transferred from a computer to a PLC connected with an Ethernet cable.
Transferring Routing Tables to Networks
Direct Ethernet Connections
Version
Upgrade
The Popular Automatic Online Connection to PLCs Is Now Even Easier!
The computer's serial ports are automatically searched when an automatic online connection is used,
so it is no longer necessary to individually specify the port used.
Automatic Search for Computer Port for Automatic Online Connection
Version
Upgrade
Version
Upgrade
Version
Upgrade
Setting and transferring routing tables
required a lot of time onsite to
reconnect the cables for each PLC.
Routing tables can be set and
transferred from a PLC in just one
location!
Work is greatly simplified by the ability
to set and transfer routing tables from
one location to all the PLCs on a
network of the same layer.
The computer port (e.g., COM2 or COM3)
had to be specified using a separate menu
command for selecting the connection port
when an automatic online connection was
performed with the PLC connected to the
computer's USB port (except for COM1).
No communications port settings are
required! Only the connectable
communications ports are displayed,
so online connection is easy.
Online connection can be easily made with
two clicks of the mouse. There's no need to
worry whether online connection at the
worksite will be possible when an error occurs.
Routing tables can be transferred
with the PLCs connected to an
Ethernet network.
Routing tables can be transferred from
the computer to a PLC using an
Ethernet cable. No work is required for
reconnecting Peripheral Cables onsite.
A separate Peripheral Cable was
required to transfer routing tables when
the computer and the PLC were directly
connected using Ethernet. Work for
making routing table settings onsite
was troublesome.
Network
Serial
connection
Note
: Routing tables cannot be set across network layers (same as
previously).
The PLC connected to the computer must be a CS/CJ-series PLC
with unit version 4.0 or later.
Supported
for unit version
4.0 or later.
Support is provided with CS/CJ-series PLCs with unit
version 4.0 or later.
To acquire a CS/CJ-series PLC with unit version 4.0,
contact your OMRON representative.
Work is
easy!
Easy online
connection
with two
clicks!
No Peripheral Cable
required!
of the port used on
the computer
Much shorter!
Even Less Time Required to Design Networks
Resuming transfer
to computer
No
Start
Resuming transfer
to computer
Yes
