5
．
Applicable Devices and Device Configuration
7
Precautions for Correct Use
Update CX-Programmer and CX-Protocol to the version specified in this
Clause 5.2.
or to a
higher version. If you use a version higher than the one specified, the procedures and related
screenshots described in
Section 7.
and subsequent sections may not be applicable.
In that case, use the equivalent procedures described in this document by referring to the
CX-Programmer OPERATION MANUAL
(Cat. No. W446) and the
CX-Protocol OPERATION
MANUAL
(Cat. No. W344).
Additional Information
For information on the serial cable (RS-232C), refer to
3-4 RS-232C and RS-422A/485
Wiring
of the
CJ Series Serial Communications Units OPERATION MANUAL
(Cat. No.
W336).
Additional Information
For specifications of 24 VDC power supply available for Sensor Controller, refer to the
Displacement Sensor ZW-7000 series Confocal Fiber Type Displacement Sensor User’s
Manual
(Cat. No. Z362).
Additional Information
The system configuration in this document uses USB for the connection between Personal
computer and PLC. For information on how to install the USB driver, refer to
A-5 Installing the
USB Driver
in
Appendices
of the
CJ-series CJ2 CPU Unit Hardware USER'S MANUAL
(Cat.
No. W472).
Summary of Contents for CJ2H-CPU64 -
Page 81: ...78...
Page 82: ...2016 0616 P652 E1 01...
