![background image](http://html1.mh-extra.com/html/omron/c200hw-srm21-v1-cs1w-srm21/c200hw-srm21-v1-cs1w-srm21_operation-manual_742333298.webp)
277
Water-resistant Terminals
Section 5-4
Note
1.
Check that the junction of the contact block and cover is free of external
force imposed, or otherwise the IP67 enclosure rating will be lost.
2.
Water-resistant Terminals used as Slaves are of IP67 construction. Do not
attempt to use the Water-resistant Terminals for applications where the
Water-resistant Terminals are always underwater.
3.
The Unit is a plastic resin mold product. Do not tread on the Unit or put ob-
jects on the Unit.
OMRON’s 2-wired Proximity Sensors with relay connectors are classified into
M1GJ models, which have the IEC pin arrangement, and M1J models, which
have the OMRON pin arrangement. The following Water-resistant Terminals
are compatible with these different pin arrangements.
5-4-2
SRT2-OD
@@
CL (-1) Water-resistant Terminals with 4 or 8
Transistor Outputs
Specifications
The following tables show the ratings and input specifications for the SRT2-
OD
@@
CL (-1).
Ratings
2-wired sensor (with relay connector)
Compatible Water-resistant Terminals
IEC pin arrangement (M1GJ model)
SRT2-ID04CL-1
SRT2-ID08CL-1
OMRON pin arrangement (M1J model)
SRT2-ID04CL
SRT2-ID08CL
Item
Specification
Models
SRT2-OD04CL, SRT2-OD04CL-1, SRT2-OD08CL,
SRT2-OD08CL-1
I/O points
SRT2-OD04CL: 4 output points (NPN)
SRT2-OD04CL-1: 4 output points (PNP)
SRT2-OD08CL: 8 output points (NPN)
SRT2-OD08CL-1: 8 output points (PNP)
Connection
Communications
XS2C-D4S7: Connector Socket Assembly (female)
(Crimp terminals/Solder terminals)
Outputs
XS2G-D4
@@
: Connector Plug Assembly (male)
(Crimp terminals/Solder terminals)
XS2H-D421-
@@@
: Connector with cable (male plug on
one end)
XS2W-D42
@
-
@@@
:Connectors with cable (Socket/Plug
on both ends)
I/O power
XS2C-D4
@@
: Connector Socket Assembly (female)
(Crimp terminals/Solder terminals)
XS2F-D42
@
-
@
80-A: Connector with cable
(female socket on one end)
Power supply type
Multiple power supplies
Communications power
supply voltage
14 to 26.4 V DC
(Power can be supplied from the communications cable)
I/O power supply voltage
20.4 to 26.4 V DC (24 V DC
+10%
/
–15%
)
I/O power supply current
2.4 A max.
Current consumption
(See note.)
Communications power: 50 mA max. at 24 V DC
Noise immunity
1.5 kVp-p with a pulse width of 0.1 to 1
µ
s and a rise time
of 1 ns (tested with impulse noise simulator)