3 Check and start operation
3-5 UPS operation mode settings
BU100RS
57
3
3-5-2 Settings
The UPS operation mode can be set if the “Power” switch is turned ON while the “Buzzer
Pause/Test” switch is pressed.
Note: While in setting mode, output from the power supply output is OFF even if the “Power” switch is
ON.
(1) When the “Buzzer Pause/Test” switch is briefly pressed (for less than 1 second), the
next item is displayed.
Output voltage
Maximum backup time
Reboot battery voltage
BS signal delay
BU signal delay
Dry contact logic
Dry contact test
(2) The unit enters the “individual item setting mode” when the “Buzzer Pause/Test” switch
is pressed and held (for more than 1 second).