13
EN
7. Viewing the Last Measurement Results
Up to 30 measurement results are automatically stored for each personal profile number and the last (previous)
measurement results can be displayed for this unit.
Note:
When using the Guest mode, measurement results are not stored.
1.
Press the Personal Profile Number
button to turn on the power.
2.
Take a measurement.
If you want to compare the results with the last
(previous) values, measure your body
composition.
3.
Press GUEST/ MEMO button.
The last weight value is displayed.
If you have measured your body composition in
step 2, each press of the GUEST/
MEMO
button alternates between the current
measurement result and the last (previous)
result.
Notes:
• If there are no results for the last
measurement, “- - - -” is displayed.
• If you have not measured your body
composition in step 2, current measurement
results cannot be displayed even if you press
the GUEST/
MEMO button.
4.
Press the SET/MODE button to cycle through the other measurement values.
Note:
Refer to Section 8 if you want to transfer the data.
5.
Press the WEIGHT/OFF button to
turn off the power.
Last body fat percentage
Last visceral fat level
Last resting metabolism
Last body age
Last BMI
Last weight
Last skeletal muscle
percentage
Care and maintenance
HBF-206IT-E_A_M.book Page 13 Wednesday, March 10, 2010 12:04 PM
