B7AM-6BS
B7AM-6BS
53
Nomenclature
Power terminals
Output terminals
Power terminals
Input terminals
Input indicators
Selector switch
Output indicators
Power supply/
error indicator
Transmission
terminal
Transmission
terminal
Indicator Operation
Indicator
Function
POWER/ERR
G
Lit when power is supplied and the
Terminal is operating without error.
R
Lit during transmission errors
(SIG2).
N
Not lit when power is not supplied.
I/O
O
Lit when the input signals are ON.
N
Not lit when the signals are OFF.
Note:
G: Green indicator lit; R: Red indicator lit;
O: Orange indicator lit; N: Not lit
Recommended Solderless Terminals
Wire
JIS specifications
0.75 mm
2
(AWG#18)
RAV 1.25 to 3.5 (vinyl-insulated round
wire) or RAP 1 25 to 3 5
1.25 mm
2
(AWG#16)
wire) or RAP 1.25 to 3.5
(nylon-insulated round wire)
Settings of Selector Switch
I/O delay selector switch
Error processing selector switch
3 ms
19.2 ms
HOLD
LOAD OFF
HIgh speed: (typical 3 ms)
Normal speed: (typical 19.2 ms)
When an error occurs, the
output holds the state that
existed right before the error
occurred.
When an error occurs, the
output shuts off everything.
Note:
Default settings are 19.2 ms and LOAD OFF.