MicroHAWK V/F430-F with Ring Light Window and LED
Installation
Window Kit Hardware, MicroHAWK
V/F430-F with Ring Light
Qty Description
Part
Number
1
Window Assembly (included)
V430-AF0R (Window)
V430-AF1R (Diffuser)
1
Window Gasket (included)
2
#2-56 X 3/8” Phillips Flat Head Screw (included)
4
#4-40 X 1/4” Phillips Pan Head Screw w/ Lock
Washers (included)
1
Phillips Torque Wrench (not included)
N/A
LED Kit Hardware, MicroHAWK V/F430-F
with Ring Light
Qty Description
Part
Number
1
LED Board Kits (included)
V430-ALR (Red LEDs)
V430-ALW (White LEDs)
V430-ALB (Blue LEDs)
V430-ALI (IR LEDs)
1
Window Gasket (included)
2
#2-56 X 3/8” Phillips Flat Head Screw (included)
4
#4-40 X 1/4” Phillips Pan Head Screw w/ Lock
Washers (included)
1
Phillips Torque Wrench (not included)
N/A
Window Removal, MicroHAWK V/F430-F with Ring Light
Step 1:
Disconnect power from the camera.
Step 2:
Unscrew the four #4-40 pan head screws that secure the window.
Step 3:
Remove the gasket from around the window frame.
Step 4:
If not replacing the LED Board, go to step 8. If replacing the LED Board, unscrew the two #2-56
flat head screws that secure the diffuser.
Note:
Do not touch the electronics or lens, as this may cause damage.